- Customer Care
- Instruments
- ElmaTear
-
James Heal
-
Hardware
-
Software
-
Firmware
-
Instruments
- Wrinkle Recovery Tester
- Wascator
- ProMace
- Titan 4, 5 and 10
- GyroWash
- FlexiFrame
- DynaWash
- TruBurst
- Orbitor
- Spray Rating Tester
- CrockMaster
- FlexiBurn
- Apollo
- SnagPod
- ThermaPlate
- TruFade
- AccuDry
- Martindale
- ElmaTear
- ElastAbrasion
- ProView
- Sample Cutters
- Titan
- Colour Assessment Cabinets
- Perspirometer
- Impulse
- Titan 1 2 3
- Crease Recovery Angle Tester
- DynaWash & DynaWash Duo
-
Operator's Guides
- GyroWash
- ElastAbrasion
- ProView
- Martindale 1300 Series
- Martindale 900 Series
- TruBurst
- FlexiBurn
- Orbitor
- HydroView - Hydrostatic Pressure Tester
- CrockMaster
- Wascator
- DynaWash & DynaWash Duo
- AquAbrasion 1819
- ThermaPlate
- Impulse
- Sock Abrasion Kit
- AccuDry
- Memmert Incubator IN30
- Spray Rating Tester
- Martindale 1600 Series
- AirPro - Air Permeability Tester
- TruFade
- Sample Cutters
- Titan
- General
- Tautex
- Perspirometer
- ElmaTear
- Martindale model 103
- Crease Recovery Angle Tester
- FlexiFrame
- ProDry
- Yellowing Test Kit
- Incubator / Oven
- Wrinkle Recovery Tester
- TruRain
- ProMace
- WickView
- SnagPod
- INSTALLATION GUIDE
- Drape Tester
-
Test Materials
-
EU Declaration of Conformity
-
Material Safety Data Sheets
-
General
-
Uncategorized
-
Filters
Which standards can be performed on ElmaTear?
The following standards can be performed on the ElmaTear elmendorf tester:
Textile
- ASTM D 1424
- GB/T 3917.1
- EN ISO 13937-1
- ISO 4674-2
- M&S P29
- NEXT 17
- AS 2001.2.8
- BIS IS 6489-1
- CAN/CGSB 4.2 No.12.3
- JIS L 1096 D
Paper
- GB/T 455
- ISO 1974
- PAPTAC D9
- TAPPI T414
- AS/NZS 1301.400s
Non-Woven
- WSP 100.1
Plastics
- ASTM D 1922
- ISO 6383-2
- JIS K 7128-2
- BIS IS 13360-5-23
- GB/T 16578.2
The test procedure is not applicable to knitted textile fabrics or isotropic materials such as felts.